| Solution pump pressure | 100 psi / 6.9 bar | |||||
| Solution pump voltage | 120 V | |||||
| Solution pump amps | 1 A | |||||
| Solution pump open flow rate | 1.8 gpm / 6.81 L/min | |||||
| Heat Exchanger | Description | Cast aluminum, hairpin element cast into | aluminum, surface mount thermostat; preset to | 170F (76.6C) for safety | ||
| Airflow at 2 in / 50 mm orifice | 101 ft3 / 2.8 m3/h | |||||
| Water lift at sealed orifice | 137 in / 3480 mm (LP) / 134 in /3403 mm (HPH) | |||||
| Vacuum motor type | Single speed, tangential discharge, 5.7 in / 145 mm diameter, dual ball bearings, | epoxy painted fan case; recognized by UL | ||||
| Vacuum motor power | 1.66 hp / 1.23 kW (LP) / 2.5 hp / 1.87 kW (HPH) | |||||
| Vacuum motor stages | 3 Stage | |||||
| Vacuum motor voltage | 120 V AC | |||||
| Vacuum motor amps | 13 A (LP) / 10 A (HPH) | |||||
| Solution tank capacity | 15 gal / 56.7 L | |||||
| Recovery tank capacity | 19 gal / 71.9 L | |||||
| Construction type | Rotationally-molded polyethylene | |||||
| Caster diameter (locking) | 4 in / 100 mm | |||||
| Wheel diameter | 12 in / 305 mm | |||||
| Power cord length | 25 ft / 7.6 m, 1 cord / 2 cord (EX-CAN-15 HPH) | |||||
| Power cord type | 14 gauge 3 wire SJTO, recognized by UL and CSA, safety yellow, detachable | |||||
| Tool/accessory description | Low pressure (EX-CAN-15 LP) / High pressure (EX-CAN-15 HPH) 13 in / 330 mm floor tool | with three spray jets, stainless steel wand/shoe, 15 ft x 1.5 in / 4.5 m x 380 mm vacuum hose, | 15 ft x 3/8 in 4.5 m x 90 mm solution hose | |||
| Dimensions/Weight/Sound Level | Length/Width/Height/Weight/Sound | L:38 in/965 mm, W:19 in/482 mm,H:38 in / 965 mm, Wt:110 lb / 49.8 kg (LP) 145 lb / 65.7 kg (HPH), 82 dBA |
Reconditioned Tennant EX-CAN-15LP Carpet Extractor
Portable low and adjustable pressure canister carpet extractors make quick work in tight areas. Pick the model that meets your cleaning needs. Prevent over-wetting with an adjustable water pressure unit with built-in heater to increase cleaning power or choose the standard 100 psi model. Get quick, easy access to working parts with the convenient clamshell design. Strong and robust construction means years of dependable use. Solution tank: 15 gal., recovery tank: 19 gal.
Condition: Refurbished (Reconditioned). Learn more about Our Reconditioning Process Here.
Features
- Control your clean Pick the model that meets your cleaning needs. Prevent over-wetting with an adjustable water pressure unit with built-in heater to increase cleaning power or choose the standard 100 psi model.
- Simple maintenance, easy mobility Get quick, easy access to working parts with the convenient clamshell design. The extractor's large rear wheels increase mobility and allow for easier transportation on stairs.
- Low cost life-cycle Strong and robust construction means years of dependable use. The unique bladder design maximizes solution/recovery while minimizing the unit's footprint.