| Productivity (per hour) | |
| Theoretical max | 28,600 ft 2/hr |
| Estimated coverage - Conventional | 20,571 ft 2/hr |
| Brush Drive System | |
| Scrub motor | 2x 24 VDC, 0.75 hp |
| Brush Pad RPM | 220 rpm |
| Brush down pressure | Low: 40 lbs |
| Med: 80 lbs | |
|
|
High: 120 lbs |
| Solution/Recovery System |
|
| Solution tank capacity | 22.5 gal |
| Recovery tank capacity | 27 gal |
| Vacuum motor | 24 VDC, 0.63 hp |
| Vacuum water lift | 46 in |
| Vacuum water lift- Quiet-Mode | 32 in |
|
|
|
| Propelling System |
|
| Scrubbing speed | 2.5 mph |
| Transport speed | 2.7 mph |
| Machine Specifications | |
| Length x Width x Height | 58.5 in x 27.5 in x 43.3 in |
| Squeegee width | 38.3 in |
| Aisle turnaround width | 59 in |
| Weight | 320 lbs |
| GVM | 800 lbs |
| Sound level | 66.5 dBA |
| Quiet-Mode | 61.7 dBA |
Technical specs may include optional equipment that is not included with all units.
Reconditioned Tennant T500e 26" Disk Traction Drive Floor Scrubber
T500e Walk-Behind - Disk Scrubber, 650mm / 26"
Deliver predictable results, extend machine life, and reduce the cost of ownership with a suite of innovative technologies. The Tennant T500/T500e walk-behind floor scrubbers provide optimal performance and consistent results on virtually any hard floor surface condition while lowering cleaning costs. Help make your cleaning operation more productive and consistent by choosing from a variety of optional innovative technologies.
Condition: Refurbished (Reconditioned). Learn more about Our Reconditioning Process Here.
- With Quiet-Mode™, clean at 62 dBA with a vac motor that allows for quiet anytime cleaning.
- Reduce risk of slips and falls with a redesigned squeegee and integrated p-trap that improves water pick up and prevents water from dripping on the floor after cleaning.
- The Tennant T500/T500e reduces the time spent trying to accurately fill the solution tank with auto-fill and water level monitor.
- Reduce the risk of contact with dirty recovery water and decrease the need for secondary cleaning operations caused from spills with optional flow control valve.
- Help prevent breakdowns and simplify preventative maintenance and training requirements with yellow touch points.


