Aztec UltraEdge parts list and diagrams
Every part number in Aztec's UltraEdge propane concrete edger owner's manual, with the manual's drawings, troubleshooting, maintenance and specs. Each part number links to that part in our store.
Complete list: every parts line in Aztec's UltraEdge Owner's Manual (05-2023), for the UltraEdge propane concrete edger with the Kawasaki 603cc engine. Checked .
New to your UltraEdge? Start here → Manuals (free sign-in) → How to use PartFinder (3-min video) →
- Grinding width
- 13 in (33 cm)
- Engine
- Kawasaki 603 cc, propane; 17.19 hp on LPG
- Head speed
- 385 to 650 rpm
- Grinding pressure
- 75 to 175 lb (34 to 79.4 kg)
- Weight
- 478 lb (216.8 kg); shipping weight 523 lb (237.2 kg)
Wear parts most UltraEdge owners reorder
Aztec's maintenance pages say to check the drive plates and flex material for wear and to clean and replace the filters, and its warranty treats belts and engine tune-up parts as wear items. These are the ones on the parts list.
- No photo yet
Pre filter
$8.09/EA - No photo yet
Air filter
$25.40/EA Oil filter
$24.37/EA- No photo yet
Belt
$59.75/EA - No photo yet
Flex plate
$146.17/EA - No photo yet
Drive plate
$316.21/EA
Source: Aztec UltraEdge Owner's Manual (05-2023), pages 6, 7, 8, 9 and 16. SES ref PF-MJCY-DDCS
Your machine
How to tell which you have
- One model: this manual covers the UltraEdge propane concrete edger with a 13 in (33 cm) grinding width and the Kawasaki 603cc engine. Every line on this page fits it.
- UltraGrind plates: the spec sheet says the UltraEdge quick change plate system is interchangeable with the UltraGrind. This page lists only the parts in the UltraEdge manual.
How to read this list
Our part numbers are the Aztec number with AZ in front, so Aztec 152-700 is AZ152-700. Where Aztec prints a space inside a number (293-20# STLMF), our part number drops it (AZ293-20#STLMF). Each line shows the item number on the drawing. Blue part numbers open the part page. Lines marked Call to confirm part are not listed online yet; call 800-440-6723 and we will source them. Prices were current on ; your cart always shows the current price. Have your machine serial number ready when you call.
Aztec UltraEdge Body assembly parts
The body, gear box and its pulley, belt, belt tensioner, idler pulley, belt cover, vacuum cap, wheels and dust/splash skirt. Manual page 11.
Tap a part number to see that part.
| Item | Part number | Qty | Description and notes | Price |
|---|---|---|---|---|
| 1 | AZ113-BP72 | 1 | BELT | $59.75/EA |
| 2 | AZ164-22836Aztec 164-22836 | 1 | 1/2-13 LOCK NUT | Call to confirm part: 800-440-6723 |
| 3 | AZ041-BA-02PAztec 041-BA-02P | 1 | FLAT IDLER PULLEY | Call to confirm part: 800-440-6723 |
| 4 | AZ164-JOC300HCS5ZAztec 164-JOC300HCS5Z | 1 | 1/2-13X3 BOLT | Call to confirm part: 800-440-6723 |
| 5 | AZ011-6-2795 | 1 | BELT TENSIONER | $75.93/EA |
| 6 | AZ172-041Aztec 172-041 | 1 | PULLEY (GEAR BOX) | Call to confirm part: 800-440-6723 |
| 7 | AZ041-953Aztec 041-953 | 1 | GEAR BOX | Call to confirm part: 800-440-6723 |
| 8 | AZ283-041-20Aztec 283-041-20 | 2 | SPACER BLOCK | Call to confirm part: 800-440-6723 |
| 9 | AZ040-3015 | 1 | VACUUM CAP | $1.17/EA |
| 10 | AZ288-041-300Aztec 288-041-300 | 1 | BELT COVERAztec prints the same number for SWIVEL BRACKET ASSEM. (page 12, item 17). | Call to confirm part: 800-440-6723 |
| 11 | AZ288-041-100Aztec 288-041-100 | 1 | BODY ASSEMBLY | Call to confirm part: 800-440-6723 |
| 12 | AZ156-040 | 2 | WHEEL ASSEMBLY | $694.80/EA |
| 13 | AZ041-100 | 1 | DUST/SPLASH SKIRT | $63.36/EA |
Aztec UltraEdge Handle assembly parts
The handle, T-handle and grips, throttle cable, key switch, lanyard kill switch, wire harness, starter solenoid, battery and battery box, and the 20# LP cylinder. Manual page 12.
Tap a part number to see that part.
| Item | Part number | Qty | Description and notes | Price |
|---|---|---|---|---|
| 1 | AZ283-040-600Aztec 283-040-600 | 1 | HANDLE STRUT | Call to confirm part: 800-440-6723 |
| 2 | AZ011-762WHK | 1 | WIRE HARNESS | $43.75/EA |
| 3 | AZ296-SS581 | 1 | STARTER SOLENOIDAztec prints this number as 296-SS-581. | $39.95/EA |
| 4 | AZ283-11-2127BAztec 283-11-2127B | 1 | BATTERY BOX BOTTOM | Call to confirm part: 800-440-6723 |
| 5 | AZ276-GTX14 | 1 | BATTERY 12V | $155.07/EA |
| 6 | AZ283-11-2127TAztec 283-11-2127T | 1 | BATTERY BOX TOP | Call to confirm part: 800-440-6723 |
| 7 | AZ625-98404A385 | 1 | LOCK PIN | $11.91/EA |
| 8 | AZ312-308-0385 | 1 | KEY SWITCH | $27.72/EA |
| 9 | AZ153-73459 | 1 | LANYARD KILL SWITCH | $75.00/EA |
| 10 | AZ224-1Aztec 224-1 | 2 | HANDLE GRIP | Call to confirm part: 800-440-6723 |
| 11 | AZ283-025-600Aztec 283-025-600 | 1 | T-HANDLE | Call to confirm part: 800-440-6723 |
| 12 | AZ196-60314 | 1 | THROTTLE CABLE | $19.95/EA |
| 13 | AZ283-041-600Aztec 283-041-600 | 1 | HANDLE STRUT W/OIL DRAIN | Call to confirm part: 800-440-6723 |
| 14 | AZ293-20#STLMF | 1 | 20# LP CYLINDER | $349.00/EA |
| 15 | AZ288-041-400Aztec 288-041-400 | 1 | HANDLE BASE ASSEM. | Call to confirm part: 800-440-6723 |
| 16 | AZ288-041-700Aztec 288-041-700 | 1 | VAC HOSE GUIDE BRKT. | Call to confirm part: 800-440-6723 |
| 17 | AZ288-041-300Aztec 288-041-300 | 1 | SWIVEL BRACKET ASSEM.Aztec prints the same number for BELT COVER (page 11, item 10). | Call to confirm part: 800-440-6723 |
Aztec UltraEdge Wheel axle assembly parts
The axle brackets, adjustment side bars, axle spacers, wheels, T-slot nuts and the bolts, nuts and washers that hold them. Manual page 13.
Tap a part number to see that part.
| Item | Part number | Qty | Description and notes | Price |
|---|---|---|---|---|
| 1 | AZ164-36869Aztec 164-36869 | 2 | AXLE NUT | Call to confirm part: 800-440-6723 |
| 2 | AZ164-110120382Aztec 164-110120382 | 2 | 1/2-13X2 HCS | Call to confirm part: 800-440-6723 |
| 3 | AZ164-20159 | 2 | 1/2” FLAT WASHER | $1.04/EA |
| 4 | AZ283-040-1000Aztec 283-040-1000 | 4 | ADJUSTMENT SIDE BAR | Call to confirm part: 800-440-6723 |
| 5 | AZ164-10115 | 8 | 3/8-16X1 HCS | $1.15/EA |
| 6 | AZ164-20156 | 16 | 5/16” FLAT WASHER | $1.02/EA |
| 7 | AZ164-22834 | 8 | 3/8-16 STOVER LOCK NUT | $1.05/EA |
| 8 | AZ164-5OC500BTA5ZAztec 164-5OC500BTA5Z | 2 | 1/2-13X5” BOLT | Call to confirm part: 800-440-6723 |
| 9 | AZ164-20159 | 4 | 1/2” FLAT WASHER | $1.04/EA |
| 10 | AZ164-22836Aztec 164-22836 | 2 | 1/2-13 STOVER LOK NUT | Call to confirm part: 800-440-6723 |
| 11 | AZ164-22008 | 2 | 1/2-13 HEX NUT | $1.07/EA |
| 12 | AZ164-731-54338Aztec 164-731-54338 | 2 | T-SLOT NUT | Call to confirm part: 800-440-6723 |
| 13 | AZ288-041-15Aztec 288-041-15 | 2 | AXLE BRACKET ASSEM. | Call to confirm part: 800-440-6723 |
| 14 | AZ040-3010 | 2 | AXLE SPACER | $7.91/EA |
| 15 | AZ156-040 | 2 | WHEEL ASSEMBLY | $694.80/EA |
| 16 | AZ164-18R200PC0Z | 2 | COTTER PIN | $0.38/EA |
| 17 | AZ164-22514Aztec 164-22514 | 2 | 1/2-13 NYLOK NUT | Call to confirm part: 800-440-6723 |
Aztec UltraEdge Diamond drivers parts
The drive plate, hub, flex plate, mount and hub rings, safety strap, shaft plates, key and hardware, and the complete drive plate assembly. Manual page 14.
Tap a part number to see that part.
| Item | Part number | Qty | Description and notes | Price |
|---|---|---|---|---|
| 1 | AZ164-37C225KSCST | 3 | 3/8-16X2¼ FSCS | $15.95/EA |
| 2 | AZ164-37C25KSCAztec 164-37C25KSC | 3 | 3/8-16X2½ FSCS | Call to confirm part: 800-440-6723 |
| 3 | AZ283-040-2255 | 1 | DRIVE PLATE | $316.21/EA |
| 4 | AZ283-040-2220Aztec 283-040-2220 | 1 | MOUNT SPACER | Call to confirm part: 800-440-6723 |
| 5 | AZ164-22834 | 12 | 3/8-16 STOVER LOK NUT | $1.05/EA |
| 6 | AZ283-040-2215Aztec 283-040-2215 | 1 | HUB RING | Call to confirm part: 800-440-6723 |
| 7 | AZ040-2210 | 1 | FLEX PLATE | $146.17/EA |
| 8 | AZ283-040-2230 | 1 | HUB | $173.33/EA |
| 9 | AZ164-10117-SS | 6 | 3/8-16X1¼ HCS | $1.16/EA |
| 10 | AZ283-040-2245Aztec 283-040-2245 | 1 | MOUNT RING | Call to confirm part: 800-440-6723 |
| 11 | AZ164-22004 | 3 | 3/8-16 HEX NUT | $1.03/EA |
| 12 | AZ283-040-2225 | 1 | SAFETY STRAP | $16.98/EA |
| 13 | AZ164-110120325Aztec 164-110120325 | 2 | 5/16-18X1 HCS | Call to confirm part: 800-440-6723 |
| 14 | AZ283-040-2240Aztec 283-040-2240 | 1 | SHAFT LOCK PLATE | Call to confirm part: 800-440-6723 |
| 15 | AZ164-10117-SS | 1 | 3/8-16X1¼ HCS | $1.16/EA |
| 16 | AZ283-040-2235Aztec 283-040-2235 | 1 | SHAFT END PLATE | Call to confirm part: 800-440-6723 |
| 17 | AZ199-NHNT-SE UND | 1 | ¼” KEYSame part number as engine item 7. Aztec prints this number as 199-NHNT-SE UND. | $0.70/EA |
| 18 | AZ041-2255Aztec 041-2255 | 1 | DRIVE PLATE ASSEMBLYComplete assembly. Drawn twice: as the bracket around items 1 to 12 and as the assembled plate. | Call to confirm part: 800-440-6723 |
Aztec UltraEdge 603cc Kawasaki engine parts
The Kawasaki 603cc engine parts Aztec lists: foam hat, debris screen, filters, oil pressure switch, oil drain, clutch, exhaust manifold and muffler. Manual page 14.
Tap a part number to see that part.
| Item | Part number | Qty | Description and notes | Price |
|---|---|---|---|---|
| 1 | AZ186-271964 | 1 | FOAM HAT | $34.50/EA |
| 2 | AZ309-18540-603 | 1 | DEBRIS SCREEN | $32.00/EA |
| 3 | AZ175-8.25*9.75 | 1 | DEBRIS SCREEN SEAL | $14.95/EA |
| 4 | AZ152-N3-0082 | 1 | OIL PRESSURE SWITCH | $76.05/EA |
| 5 | AZ309-49065-7007 | 1 | OIL FILTER | $24.37/EA |
| 6 | AZ312-504-0185 | 1 | OIL DRAIN DRIVEThe oil change steps on page 8 call this the oil drain valve. | $19.95/EA |
| 7 | AZ199-NHNT-SE UND | 1 | ¼” KEYSame part number as diamond drivers item 17. Aztec prints this number as 199-NHNT-SE UND. | $0.70/EA |
| 8 | AZ311-180007 | 1 | CENTRIFUGAL CLUTCH | $327.82/EA |
| 9 | AZ164-20159 | 1 | ½” FLAT WASHER | $1.04/EA |
| 10 | AZ164-10301Aztec 164-10301 | 1 | 7/16-20X1 HCS | Call to confirm part: 800-440-6723 |
| 11 | AZ309-11060-7016 | 2 | EXHAUST GASKET | $3.18/EA |
| 12 | AZ152-603-MAN | 1 | EXHAUST MANIFOLD | $92.35/EA |
| 13 | AZ152-603-MUF | 1 | MUFFLER | $545.00/EA |
| 14 | AZ309-11013-7046 | 1 | PRE FILTER | $8.09/EA |
| 15 | AZ309-11013-7049 | 1 | AIR FILTER | $25.40/EA |
Aztec UltraEdge Fuel system parts
The quick connect, 20 in LPG hose, 12V fuel lock-out, hose barb fitting and LPG regulator. Manual page 15.
Tap a part number to see that part.
| Item | Part number | Qty | Description and notes | Price |
|---|---|---|---|---|
| 1 | AZ152-700 | 1 | QUICK CONNECT | $29.17/EA |
| 2 | AZ267-P5561-0410 | 1 | LPG HOSE 20” | $57.00/EA |
| 3 | AZ152-N3-0173-1 | 1 | FUEL LOCK OUT 12V | $47.75/EA |
| 4 | AZ166-62039 | 1 | HOSE BARB FITTING | $2.50/EA |
| 5 | AZ152-500 | 1 | LPG REGULATOR | $222.17/EA |
New to your Aztec UltraEdge? Start here
Set up, run and look after your UltraEdge. Everything here comes from Aztec’s owner’s manual, rewritten in plain steps, with the parts you need linked to the list above.
1Check it before every start
- Park on a level surface and check the engine oil. Take 2 dipstick readings before you add oil, and never overfill.
- Check the carburetor air filter (AZ309-11013-7049), the diamonds and the diamond plates. Set the handle height.
- Soap-test the tank, lines and fittings every time you fill or connect the LPG cylinder (AZ293-20#STLMF). Fix any leak before you run the machine.
- Never overfill the tank. It holds 20 lb of propane and a full tank should weigh no more than 48 lb. Frost on the lines or the regulator (AZ152-500) means it is overfilled.
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 3 and 5. SES ref PF-GRGG-ZGVL
2Install the fuel cylinder
- Take the UltraEdge to a well-ventilated area with no source of ignition within 10 ft (3 m).
- Check the cylinder for overfill, set it in the tank holding area and fasten the safety strap.
- Line up the couplers and screw them together by hand. Never use a wrench or pliers, and don’t cross-thread them.
- Open the service valve slowly. Listen for the rush of fuel to the fuel lock-out (AZ152-N3-0173-1), and stay alert for a propane smell that could mean a leak.
- To take the cylinder off, reverse these steps.
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 3 and 5. SES ref PF-GRGG-ZGVL
3Install diamonds
- Stop the engine. Close the service valve on the fuel cylinder so liquid can’t get into the regulator.
- Raise the handle and tilt the machine back until the handle rests on the floor. Never tip it on its side.
- Line up each diamond shoe with the slots in the drive pad and push it firmly into the slot.
- Look over the red flex plate (AZ040-2210) disc for wear.
- Bring the machine back to its operating position.
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 2, 4 and 5. SES ref PF-GRGG-ZGVL
4Start, run and stop
- Check the cylinder for overfill and open the tank valve by turning it counterclockwise.
- Clip the lanyard kill switch (AZ153-73459) to yourself and turn the key switch (AZ312-308-0385) to Start. Run the starter no more than 20 seconds at a time, and wait 10 to 20 seconds between tries.
- Increase the throttle while you walk very slowly. Don’t stay in one spot for more than a few seconds or you can damage the floor.
- Keep the machine away from loose tiles and other objects. The abrasives turn at about 650 rpm and can throw them.
- To stop, close the tank valve (turn it clockwise) and turn the key off. The exhaust stays hot for several minutes.
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 2 and 5. SES ref PF-GRGG-ZGVL
Aztec UltraEdge troubleshooting
Problems, likely causes and fixes from Aztec's troubleshooting pages. Close the service valve on the fuel cylinder and stop the engine before any work.
| Likely cause | Fix | Part |
|---|---|---|
| Engine cranks but won’t start | ||
| Fuel cylinder empty or shutoff valve closed | Refill the fuel cylinder (AZ293-20#STLMF) or open the valve. | |
| Fuel or vacuum line clogged, kinked or cut | Clear the line or replace it. | |
| Spark plug lead off, or a faulty ignition coil or kill switch | Connect the lead to the spark plug. Replace a faulty coil or switch. | |
| Faulty regulator | Replace the LPG regulator (AZ152-500). | |
| Engine starts hard | ||
| Choke or throttle set wrong, fuel or vacuum line blocked, or faulty regulator | Set the controls to the right position. Clear or replace the line, or replace the regulator (AZ152-500). | |
| Low compression | Have a trained technician service the engine. Call SES service. | |
| Engine won’t crank | ||
| Battery run down (a key left on drains it) | Charge or replace the battery (AZ276-GTX14). Turn the key off whenever the engine is off. | |
| Loose, corroded or faulty wires, or a faulty key switch or starter control switch | Take the LPG tank and the battery box cover off. Tighten, repair or replace wires and clean corroded battery posts. Repair or replace a faulty key switch (AZ312-308-0385). Wear a face shield, safety glasses and protective clothing around the battery. | |
| Engine overheats | ||
| Air intake filter screen or cooling fins clogged, or low oil | Clean out the debris or replace the filter. Check the oil and add oil. | |
| Fuel settings wrong | Have the engine serviced. | |
| Exhaust or propane smell | ||
| Dirty or clogged air filter, choke on, or carburetor or regulator set wrong | Replace the air filter (AZ309-11013-7049) or set the choke correctly. For carburetor or regulator settings, have a trained technician service the engine. | |
| Loose fittings or clamps, or cracked, cut or leaking hoses | Tighten or seal them. Soap-test: if bubbles appear the part still leaks, so replace it. | |
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 7 and 10. SES ref PF-5YO6-XCGN
Still stuck? Call 800-440-6723 and have your model and serial number ready. SES stocks Aztec parts and can help you find the cause.
Aztec UltraEdge maintenance schedule
Aztec's machine and engine maintenance schedules, gear box service and clean-up steps. Close the service valve on the fuel cylinder and stop the engine before any service. Keep a log of the date, hour meter reading and work done.
| Task | How often | Part |
|---|---|---|
| Change the recoil dust filter or vacuum it clean. | Every 2 hours | |
| Check and clean the carburetor pre-filter (AZ309-11013-7046). | Every 2 hours | |
| Check the oil level. | Every 4 hours | |
| Make sure the shroud, handle, fuel cylinder, belt and other parts are tight and secure. | Every 4 hours | |
| Check the drive plates and flex material (AZ040-2210) for cracks and diamond wear. Replace them if damaged. | Every 4 hours | |
| Clean the carburetor air filters (AZ309-11013-7049). | Every 4 hours | |
| Blow dust off the machine and engine with compressed air if you have it, mainly inside the engine shrouds. Wash the undercarriage. | Every 4 hours | |
| Check the engine oil and add oil if needed. | Daily | |
| Check for loose or missing nuts and screws. | Daily | |
| Check for fuel and oil leaks. | Daily | |
| Check or clean the air intake screen. | Daily | |
| Clean or replace the carburetor air filters (AZ309-11013-7049) before you start. | Daily | |
| Let the engine cool before you use water on it, to prevent warping. | After every use | |
| Tilt the machine back. Rinse the drive unit and drivers, then around the splash skirt and body. | After every use | |
| Set it back in operating position and run it briefly to throw off the water. | After every use | |
| Check for loose nuts and bolts while you clean. | After every use | |
| Close the tank valve, take the LPG tank off and store it in a well-ventilated, approved area. | After every use | |
| Clean the air cleaner foam element. | Every 25 hours | |
| Do all the daily jobs. | Weekly (every 20 to 50 hours) | |
| Change the oil and oil filter (AZ309-49065-7007) at 50 hours. | Weekly (every 20 to 50 hours) | |
| Check the whole machine for loose nuts and bolts. | Weekly (every 20 to 50 hours) | |
| Check all propane fuel parts for leaks or wear and replace them if needed. | Weekly (every 20 to 50 hours) | |
| Change the engine oil. Do the first change after 8 hours, then every 50 hours. Drain it through the oil drain valve while the engine is warm. | Every 50 hours | |
| Clean the air cleaner paper element (AZ309-11013-7049). | Every 50 hours | |
| Clean and adjust the valve clearance once, after the first 50 hours. | Every 50 hours | |
| Do all the daily and weekly jobs. | Monthly (every 80 hours) | |
| Change the carburetor air filter (AZ309-11013-7049). | Monthly (every 80 hours) | |
| Check the engine owner’s manual for its maintenance jobs. | Monthly (every 80 hours) | |
| Change the oil filter (AZ309-49065-7007). Oil the new seal, turn the filter on until the seal touches, then 3/4 turn more by hand. | Every 100 hours | |
| Replace the air cleaner paper element (AZ309-11013-7049). | Every 100 hours | |
| Clean and gap the spark plugs (NGK BPR4ES). | Every 100 hours | |
| Clean dust and dirt from the cylinder and cylinder head fins. | Every 100 hours | |
| Tighten nuts and screws. | Every 100 hours | |
| Use Mobilgear 630 GL90. Never run the machine without the right amount of oil: don’t overfill or underfill, and don’t let the level drop below half on the sight gauge. | Gear box | |
| After the first 100 hours, drain the oil, flush the case with an approved nonflammable, non-toxic solvent and refill. | Gear box | |
| After that, change the oil at least every 2,500 hours or every 6 months, whichever comes first. Change it more often in dusty or humid conditions. | Gear box | |
| Take extreme care with the plugs and vents. The housing gets hot enough to cause severe burns. | Gear box | |
| Do all the daily, weekly and monthly jobs. | Quarterly (every 250 hours) | |
| Have an authorized service center check the engine and its emissions. Call SES service: 800-440-6723. | Quarterly (every 250 hours) | |
| Clean the combustion chambers. | Every 300 hours | |
| Clean and adjust the valve clearance. | Every 300 hours | |
| Clean and lap the valve seating surface. | Every 300 hours |
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 6, 7, 8 and 9. SES ref PF-ICKK-W2Q5
Aztec UltraEdge specifications
From Aztec's owner's manual and the UltraEdge spec sheet.
| Grinding width | 13 in (33 cm) |
|---|---|
| Engine | Kawasaki 603 cc, propane; 17.19 hp on LPG |
| Edge reach | Within 1/4 in (0.6 cm) of walls; reaches 3 in (7.6 cm) under a 5.25 in (13.3 cm) high shelf |
| Head speed | 385 to 650 rpm |
| Grinding pressure | 75 to 175 lb (34 to 79.4 kg) |
| Weight | 478 lb (216.8 kg); shipping weight 523 lb (237.2 kg) |
| Size (L × W × H) | 50 × 30 × 42 in (127 × 76.2 × 106.7 cm) |
| Engine speed | 2,200 to 3,400 rpm (spec sheet); 1,550 rpm low idle, 3,400 rpm max high idle (manual) |
| Propane cylinder | 20 lb steel tank, OPD steel tank optional; full tank no more than 48 lb gross |
| Engine oil | 1.8 US qt (1.7 L) with the filter removed; API SF, SG, SH or SJ |
| Gear box oil | Mobilgear 630 GL90 |
| Spark plugs | NGK BPR4ES; gap about 0.030 in (0.75 mm as printed; see the notes) |
| Sound level | 86 to 87 dB |
| Warranty | Machine 1 year; engine 2 years |
Sources: Aztec UltraEdge spec sheet (05-2026), page 1; Aztec UltraEdge Owner’s Manual (05-2023), pages 3, 5, 6, 8 and 12. SES ref PF-QEMM-YS7J
Aztec UltraEdge manuals and source documents
The documents this page was built from. Sign in with a free account on our site to view or download them.
| Document | Covers | Edition | Size | Open |
|---|---|---|---|---|
| PDFby SESUltraEdge owner's manualOwner's manual with parts lists, 16 pages | UltraEdge propane concrete edger | 05-2023 (this page) | 1.9 MB | Sign in to view or downloadSign in to download |
| PDFby SESUltraEdge spec sheetSpecifications and features | UltraEdge | 05-2026 | 0.2 MB | Sign in to view or downloadSign in to download |
Need a manual that isn't listed, or a different serial range? Call 800-440-6723 with your model and serial number.
Common Aztec UltraEdge parts questions
How close to a wall does the Aztec UltraEdge grind?
Aztec’s spec sheet says it grinds and polishes within 1/4 in (0.6 cm) of walls and reaches 3 in (7.6 cm) under a 5.25 in (13.3 cm) high shelf. The grinding width is 13 in (33 cm).
Source: Aztec UltraEdge spec sheet (05-2026), page 1. SES ref PF-3JB2-SKV3
How do I change the diamonds on my UltraEdge?
Stop the engine and close the service valve on the fuel cylinder. Tilt the machine back until the handle rests on the floor, then line each diamond shoe up with the slots in the drive pad and push it firmly in.
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 2, 4 and 5. SES ref PF-3JB2-SKV3
How often do I change the oil on the UltraEdge?
After the first 8 hours, then every 50 hours. The engine takes 1.8 US qt (1.7 L) with the filter removed. The engine pages say to change the oil filter every 100 hours; Aztec’s weekly list says oil and filter at 50 hours.
Source: Aztec UltraEdge Owner’s Manual (05-2023), pages 6 and 8. SES ref PF-3JB2-SKV3
What oil goes in the UltraEdge gear box?
Mobilgear 630 GL90. Drain and flush the gear box after the first 100 hours, then change the oil at least every 2,500 hours or every 6 months, whichever comes first.
Source: Aztec UltraEdge Owner’s Manual (05-2023), page 6. SES ref PF-3JB2-SKV3
Why does the UltraEdge meter flash every 25 hours?
The maintenance meter flashes at 25 hour intervals as an oil-change alert. It flashes only while the engine runs and resets itself after two hours, so Aztec recommends a separate log to track oil changes.
Source: Aztec UltraEdge Owner’s Manual (05-2023), page 7. SES ref PF-3JB2-SKV3
What propane tank does the UltraEdge use?
A 20 lb LP cylinder. The spec sheet lists a steel tank as standard and an OPD steel tank as an option. A full tank should weigh no more than 48 lb.
Sources: Aztec UltraEdge Owner’s Manual (05-2023), pages 3 and 12; Aztec UltraEdge spec sheet (05-2026), page 1. SES ref PF-3JB2-SKV3
Can I use the UltraEdge on a slope?
No. Aztec says not to use it on surfaces with a gradient over 2%.
Source: Aztec UltraEdge Owner’s Manual (05-2023), page 4. SES ref PF-3JB2-SKV3
Notes on this parts list
Places where Aztec's drawings, parts lists and text disagree, and how this page handles them. If you are unsure, call 800-440-6723 with your serial number.
- Aztec prints 288-041-300 for two different parts: BELT COVER (body list, item 10, page 11) and SWIVEL BRACKET ASSEM. (handle list, item 17, page 12). Both lines are on this page as printed. Call us to confirm which part you need.
- Aztec prints two part numbers with a space: 293-20# STLMF (20# LP cylinder) and 199-NHNT-SE UND (¼” key). Our part numbers are AZ293-20#STLMF (no space) and AZ199-NHNT-SE UND (space kept).
- Three bolt numbers mix letters and digits. 164-JOC300HCS5Z and 164-5OC500BTA5Z are printed with a letter O after the first character group, and 164-18R200PC0Z with a zero before the Z. They are copied as printed; call us to confirm before ordering.
- The ¼” key 199-NHNT-SE UND is listed twice on page 14: item 17 in the diamond drivers list and item 7 in the engine list.
- 164-20159 (1/2” flat washer) appears three times: wheel axle items 3 (qty 2) and 9 (qty 4) on page 13, and engine item 9 (qty 1, printed ½” FLAT WASHER) on page 14. 164-10117-SS (3/8-16X1¼ HCS) is printed twice in the diamond drivers list, as items 9 (qty 6) and 15 (qty 1).
- WHEEL ASSEMBLY 156-040 is in both the body list (item 12) and the wheel axle list (item 15).
- Diamond drivers callout 18, DRIVE PLATE ASSEMBLY, is drawn twice on page 14: as the bracket around items 1 to 12 and as the assembled plate. Diamond drivers callout 5 is drawn three times, and wheel axle callout 4 twice (page 13).
- The engine drawing on page 14 shows a small cover piece with two screws beside items 14 and 15 that has no callout and no line in the list.
- The engine list names 312-504-0185 OIL DRAIN DRIVE; the oil change steps on page 8 call it the oil drain valve.
- Aztec spells the same nuts two ways: 164-22836 is 1/2-13 LOCK NUT (page 11) and 1/2-13 STOVER LOK NUT (page 13); 164-22834 is 3/8-16 STOVER LOCK NUT (page 13) and 3/8-16 STOVER LOK NUT (page 14). Descriptions are copied as printed.
- Page 8 prints the spark plug gap as 0.30 in (0.75 mm). 0.75 mm is about 0.030 in, so the inch figure looks like a misprint. Check the engine owner's manual or call us.
- The maintenance meter flashes every 25 hours as an oil-change reminder (page 7), but the oil change steps (page 8) and engine schedule (page 9) say every 50 hours after the first 8.
- Aztec's weekly list (page 6) says to change the oil and oil filters at 50 hours; the engine pages (pages 8 and 9) say to change the oil filter every 100 hours. This page shows both.
- The filter intervals differ by page: page 6 says to clean the carburetor pre-filter every 2 hours and change the carburetor air filter monthly (80 hours); page 7 says to clean the carburetor air filters after 4 hours and clean or replace them daily; the engine schedule on page 9 says to clean the paper element every 50 hours and replace it every 100 hours.
- The spec sheet gives an engine speed range of 3400-2200 RPM; the manual gives 1550 RPM low idle and 3400 RPM max high idle (page 8).
- The cover badge says the machine is powered by the PurePower by Aztec engine; the parts pages and spec sheet call it a Kawasaki 603cc engine.
- The operating procedures on pages 4 and 5 are lettered A, D, E, F, G, H and I. There are no sections B or C.
- The manual prints no edition date. The PDF is marked REV 05-23 and the warranty page carries the code 9739/09.11. This page calls it the 05-2023 edition.
- Descriptions are copied as Aztec prints them, including its spellings (for example OIL DRAIN DRIVE and VAC HOSE GUIDE BRKT.).
