New Tennant T600 Walk-Behind Scrubber 700 mm / 28" Orbital
Our Take (from the SES Sales Team)
“The orbital T600 does something a standard disk machine can't: it scrubs with a rectangular pad that oscillates at 2,200 rpm instead of spinning, which makes it a strong tool for heavy daily scrubbing and for taking floor finish off without the usual caustic stripper. Tennant says the orbital head allows chemical-free floor finish removal, so schools, healthcare and retail can strip and recoat with less chemical and less mess. On the 28 in orbital deck, Tennant rates the T600 at up to 24,005 sq ft per hour of estimated coverage, and it needs only a 60.6 in aisle to turn around, the tightest of any T600 deck. You still get the full 32 gal solution and 37 gal recovery tanks, the same 36 V battery system as every T600, Pro-Membrane zone settings and Quiet-Mode, which drops it to 62.3 dBA. For a building that refinishes floors in-house, it can do double duty as the daily scrubber and the stripping machine.”
A 28 in orbital T600 for deep scrubbing and finish removal
The Tennant T600 is an industrial walk-behind floor scrubber. This unit has the 28 in (700 mm) orbital scrub head, a rectangular pad that oscillates at 2,200 rpm, with a 32 gal solution tank and a 37 gal recovery tank. Tennant rates it at up to 36,960 sq ft per hour theoretical and 24,005 sq ft per hour of estimated coverage.
Tennant’s T600 standard equipment includes a 36 V, 240 Ah wet battery pack, a charger, conventional scrubbing and the Pro-Membrane control panel with three Zone Settings.
Condition: New.
What you get
T600 standard equipment
Orbital scrubbing: strip finish with less chemical
Features
Built for scrubbing and refinishing
- ✓28 in orbital head at 2,200 rpm for deep scrubbing and chemical-free finish removal
- ✓Tightest T600 turnaround at 60.6 in
- ✓Fully sprayable Hygenic recovery tank with a yellow debris tray that helps prevent clogs
- ✓Foot-activated squeegee with a breakaway design and an integrated P-trap that cuts drips after cleaning
- ✓Quiet-Mode lowers the sound level to 62.3 dBA for daytime cleaning
Choosing a deck
28 in T600 decks compared
| Deck | Pad / brush speed | Estimated coverage | Aisle turnaround |
|---|---|---|---|
| 28 in orbital (this unit) | 2,200 rpm | 24,005 sq ft/hr | 60.6 in |
| 28 in disk | 300 rpm | 24,005 sq ft/hr | 65 in |
| 28 in cylindrical | 760 rpm | 24,000 sq ft/hr | 67 in |
Coverage figures are Tennant’s conventional-mode estimates.
Specifications
Tennant T600 28 in orbital at a glance
| Models | T600, 28 in orbital |
|---|---|
| Cleaning path | 28 in (700 mm) orbital |
| Brushes / pads | 1 x 28 in orbital pad |
| Pad / brush speed | 2,200 rpm (orbital) |
| Down pressure | 105, 135 or 170 lb (48, 61 or 77 kg) |
| Scrub motor | 1 x 0.75 hp (0.56 kW), 36 V |
| Solution / recovery tanks | 32 gal (121 L) / 37 gal (140 L) |
| Productivity, theoretical max | 36,960 sq ft/hr (3,434 m²) |
| Estimated coverage | 24,005 sq ft/hr (2,230 m²) conventional |
| Vacuum motor | 0.75 hp (0.56 kW), 36 V |
| Vacuum water lift | 50 in (1,270 mm) |
| Batteries | 6 x 6 V, 240 Ah wet (36 V system), standard |
| Charger | On-board or off-board |
| Scrub / transport speed | 3.0 mph (4.8 km/h) / 3.3 mph (5.3 km/h) |
| Dimensions (L x W x H) | 62.6 x 29.4 x 43.6 in (1,590 x 746 x 1,107 mm) |
| Squeegee width | 38.3 in (973 mm) |
| Aisle turnaround width | 60.6 in (1,540 mm) |
| Weight | 489 lb (222 kg) without batteries; 1,327 lb (603 kg) GVW |
| Sound level | 69.5 dBA, 62.3 dBA in Quiet-Mode |
| Runtime | Up to 6.5 hr with the optional 360 Ah pack (Tennant figure, continuous scrubbing, low pressure) |
| Model Numbers | T600-700O (T600 walk-behind scrubber, 700 mm / 28 in orbital) |
Technical specs may include optional equipment that is not included with all units.
Questions
Tennant T600 orbital: common questions
Can it strip floor finish?
Tennant says the T600’s orbital scrub head allows chemical-free floor finish removal, which can virtually eliminate caustic stripping chemicals. Results depend on the finish, the pad and the number of coats.
How long does it run on a charge?
Tennant publishes run times for the optional 360 Ah pack: up to 6.5 hours on the 28 in orbital deck. With the standard 240 Ah pack, expect less. Ask us for an estimate for your floors.
Will it fit my aisles?
The 28 in orbital T600 is 62.6 in long, 29.4 in wide and 38.3 in across the squeegee, and it turns around in a 60.6 in aisle.
How does its coverage compare with the 28 in disk?
Tennant rates the 28 in orbital at the same 24,005 sq ft per hour estimated coverage as the 28 in disk, and it turns around in a tighter aisle: 60.6 in versus 65 in.
Not sure the T600 orbital fits your floors?
Tell our team about the floor, the building and the shift, and we will help you decide if this is the right machine.
